Camera Administrator: Pedestal Level Setting

■Pedestal Level Setting [Command] pedestal LVL

[Parameter]

LeVeL: 0 to 255 (1step)

[Process]

Sets the pedestal level.

<Example>

Setting the pedestal level to 128

 

pedestal 128<CR>

 

camera pedestal complete<CR>

■Auto Pedestal Level Settings

[Command] pedestal AUTO or pedestal AUTO X Y

[Parameter] AUTO: auto

X:x-coordinate of the start point of the rectangular area of the image data to be used for adjustment

Y:y-coordinate of the start point of the rectangular area of the image data to be used for adjustment

*The size of the rectangular area of the image to be adjusted is 160 ⋅ 128 for the XCI-SX1 and 80 ⋅ 64 for the XCI-V3. You are allowed to not input the X and Y parameters. (When the X and Y parameters are not input, the rectangular area of the image data to be used for adjustment is the center of the image area.)

[Process]

Adjusts the pedestal level

 

automatically.

<Example>

Adjusting the pedestal level

 

automatically using the x-coordinate

 

and y-coordinate of the top left point

 

of the rectangular area

 

pedestal auto 560 448<CR>

 

camera pedestal complete<CR>

■Current Pedestal Level Setting [Command] pedestal

[Process]

Displays the current pedestal level.

■Help of the Pedestal Level Setting [Command] pedestal --help

[Process]

Displays the help of the Pedestal Level

 

Setting command.

Camera Shutter: Shutter Mode Setting

■Shutter Mode Setting [Command] shutter -m MODE

or

shutter soft

[Parameter] MODE: monitor, trigger

 

External Control Commands

[Process]

Sets the shutter mode and generates a

 

software trigger.

<Example>

• Setting the shutter mode to monitor

 

mode

 

shutter -m monitor<CR>

 

camera shutter mode complete<CR>

 

• Generating a software trigger

 

shutter soft<CR>

 

camera shutter mode complete<CR>

Note

A software trigger function is valid only when the shutter mode is set to trigger mode.

■Current Shutter Mode Setting

[Command]

shutter -m

[Process]

Displays the current shutter mode.

■Help of the Shutter Mode Setting

[Command]

shutter -m --help

[Process]

Displays the help of the Shutter Mode

 

Setting command.

Camera Shutter: Shutter Speed Setting

■Shutter Speed Settings [Command] shutter -s SPD [Parameter] SPeeD: 2, 1, 1/15, 1/30, 1/60,

1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/25000, 1/50000, 1/100000(t-width) [sec]

[Process]

Sets the shutter speed.

<Example>

Setting the shutter speed to 1/30 sec

 

shutter -s 1/30<CR>

 

camera shutter speed complete<CR>

■Current Shutter Speed Setting

[Command]

shutter -s

[Process]

Displays the current shutter speed.

Note

For the XCI-SX1, when the shutter speed is set to 1/ 15 sec, the display depends on the shutter mode currently set.

•When the shutter mode is set to “monitor” shutter -s<CR>

shutter -s off<CR>

•When the shutter mode is set to “trigger” shutter -s<CR>

shutter -s 1/15<CR>

■Help of the Shutter Speed Setting [Command] shutter -s --help

[Process]

Displays the help of the Shutter Speed

 

Setting command.

27