![](/images/new-backgrounds/1315105/315105107x1.webp)
Model SB1018 | P A R T S | For Machines Mfg. Since 8/09 |
Machine Labels
508 | 507 | 506 | 505 |
|
|
|
504
509510
503
513
511 | 512 |
|
501
502
REF | PART # | DESCRIPTION |
501 | PSB1018501 | MACHINE ID LABEL |
502 | PSB1018502 | MODEL NUMBER LABEL |
503 | PSBLABEL15S | ELECTRICITY LABEL |
504 | PSB1017304 | BELT COVER WARNING LABEL |
505 | PSBLABEL02HS | DISCONNECT WARNING LABEL |
506 | PSB1017306 | CUTTING HAZARD WARNING LABEL |
507 | PSBLABEL04HS | EYE INJURY WARNING LABEL |
REF | PART # | DESCRIPTION |
508 | PSBLABEL01HS | READ MANUAL LABEL |
509 | PSBLABEL13VS | DOOR CLOSED WARNING LABEL |
510 | PSBPAINT01 | SB LT GRAY |
511 | PSBPAINT03 | SB DK BLUE |
512 | SB1320 | SOUTH BEND NAMEPLATE 125MM |
513 | PSBPAINT02 | SB LT BLUE |
The safety labels provided with your machine are used to make the operator aware of the machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of these safety labels. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at (360)