![](/images/new-backgrounds/1315105/31510545x1.webp)
For Machines Mfg. Since 8/09 | O P E R A T I O N | Model SB1018 |
Description of Controls & Components
Refer to Figure 24 and the following descriptions to become familiar with the basic controls and components used to operate this machine.
A.Blade Tension Knob: Adjusts the position of the upper blade wheel to increase/decrease blade tension.
B.Guide Post Knob: Locks the guide post in the position set by the operator.
C.Downfeed Rate Adjust Knob: Controls the speed at which the blade lowers into the workpiece.
D.Downfeed Valve: Controls the starting and stopping of the headstock downfeed.
E.ON/OFF Switch &
F.Swivel Lock Handle: Locks the headstock at the position set by the operator.
G.Vise Jaw Handwheel: Controls the vise jaw movement.
H.Downfeed Stop Bolt: Adjusts to determine the absolute bottom limit of blade travel.
I.Fence Scale: Indicates the angle of the vise fence.
B C
A
G | H | D |
E
F
I