iNtRODUCtiON
-2-
For Machines Mfg. Since 8/09
Model SB1020 iNtRODUCtiON
About this Machine

Capabilities

This metal cutting bandsaw uses a gravity-fed
blade to make straight cuts through workpieces
that are clamped in a vise. Since the workpiece is
secured and remains stationary while the blade
lowers automatically, accuracy and operator
safety are maximized.
The vise on the Model SB1020 is capable of
holding rectangular stock up to 9" x 12" and
round stock up to 10".
After a cut is complete, the OFF switch is
triggered and the motor automatically turns off.

Features

In addition to its capabilities, the Model SB1020
has several features to increase versatility and
efficiency.
The headstock can be rotated to make angled
cuts from -45°–60° while variable blade speeds
ensure that the proper cutting speed is available
for a variety of workpiece sizes and materials.
Both the downfeed rate and pressure are
adjustable for fine-tuning each cutting operation
and an adjustable auto-OFF power switch
maximizes safety and minimizes energy use by
turning the machine off at the end of every cut.
A flood coolant system, comprised of a coolant
tank and pump in the machine base and an
adjustable nozzle at the blade provide adequate
coolant for optimum cutting efficiency and blade
life.
A storage compartment in the cabinet base
provides a convenient location for keeping spare
blades or other accessories and the transport
handle makes moving the machine easy.