
Model SB1027 | P R E P A R A T I O N | For Machines Mfg. Since 8/09 |
Preparation Overview
The purpose of the preparation section is to help you prepare your machine for operation.
The typical preparation process is as follows:
1.Unpack the machine and inventory the contents of the box/crate.
2.Clean the machine and its components.
3.Identify an acceptable location for the machine and move it to that location.
4.Level the machine and either bolt it to the floor or place it on mounts.
5.Assemble the loose components and make any necessary adjustments or inspections to ensure the machine is ready for operation.
6.Connect the machine to the power source.
7.Test run the machine to make sure it functions properly and is ready for operation.
Things You'll Need
During the setup process, operation, and maintenance of your machine, you'll need the following items:
For Lifting
•A forklift or other power lifting device rated for the weight of the machine
•Two sifting straps rated for at least 3000 lbs. each (refer to Page 16 for details)
For Power Connection
•A qualified electrician to ensure a safe and
For Assembly
•Cotton rags
•Mineral spirits
•Safety glasses
•Oil can with any general machine oil
•Grease gun with any API GL 2 grease
•Stiff grease brush
•Phillips dcrewdriver #2
• Floor mounting hardware | as needed |
•Hex wrench 5mm
•Hex wrench 6mm
•Combo wrench 1 ⁄2" or ratchet and 1 ⁄2" socket