Model SB1040/SB1041 | P R E P A R A T I O N | For Machines Mfg. Since 8/09 |
Preparation Overview
The purpose of the preparation section is to help you prepare your machine for operation. The list below outlines the basic process. Specific steps for each of these points will be covered in detail later in this section.
The typical preparation process is as follows:
1.Unpack the machine and inventory the contents of the box/crate.
2.Clean the machine and its components.
3.Identify an acceptable location for the machine and move it to that location.
4.Level the machine and either bolt it to the floor or place it on mounts.
5.Assemble the loose components and make any necessary adjustments or inspections to ensure the machine is ready for operation.
6.Connect the machine to the power source.
7.Test run the machine to make sure it functions properly and is ready for operation.
Things You'll Need
During the setup process, operation, and maintenance of your machine, you'll need the following items:
For Lifting
ss!!FORKLIFT ORLOTHERTPOWERRLIFTINGHDEVICE rated for the weight of the machine.
ss,IFTINGT3TRAP or chain w/safety hook (rated for at least 1000 lbs.)
For Power Connection
ss!!QUALIFIEDLELECTRICIAN TO ENSURETARSAFE and
For Assembly
ssCotton Rags
ssMineral Spirits ss 3AFETY 'LASSES
ss Oil Can with any General Machine Oil ss Blade Tension Tool
ss Grease Gun with any API GL 2 Grease ss Stiff Grease Brush
ss Phillips Screwdriver #2
ss
ss Hex Wrench 6mm
ss Combo Wrench 1 ⁄2" or Ratchet and 1 ⁄2" Socket
