Southbend SB1040, SB1041 owner manual Machine Labels, 702 703

For Machines Mfg. Since 8/09 W A R R A N T Y Model SB1040/SB1041

Machine Labels

702	703
! WARNING!	! WARNING!
	INJURY HAZARD!
INJURY HAZARD	Keep door closed
	while machine is
Do not use machine if	operating. Disconnect
you have not read the	power before opening
manual. Visit	door.
southbendlathe.com or
call 360-734-1540 to

704

Motor: 1HP, 220V, 3-Phase

Amps: 3A

Blade Width Range: 1/8"–5/8"

Blade Length: 139-3/8"–140-1/2"

Blade Speeds: 88–384 FPM

Maximum Cutting Height: 9-5/8"

Capacity Left of Blade: 17-9/16"

Weight: 803 Lbs.

Serial No:

MFG Date:

Made in Taiwan to South Bend Specifications

MODEL SB1041

18" VARIABLE SPEED METAL CUTTING BANDSAW

!WARNING!

TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY WHILE

USING THIS MACHINE:

1.Read and understand manual before starting.

2.Always wear safety glasses or a face shield.

3.Never place hands directly in “line of cut.”

4.Keep all guards in place and correctly adjusted.

5.DO NOT wear loose clothing, gloves, or jewelry. Secure long hair and button all long sleeve shirts.

6.Disconnect power before performing maintenance, service, or adjustments.

7.Ensure machine is properly installed, set up, and adjusted before starting.

8.DO NOT operate when tired, or under the influence of drugs or alcohol.

9.Never attempt to stop the blade with your hand or work-

piece; allow the blade to stop on its own. 10. DO NOT force or twist blade when cutting.

11. Use fixtures, not your hands, to hold small or round workpieces.

12. DO NOT back workpiece away when blade is moving. Turn saw off and wait for the blade to come to a complete stop.

13. Never leave this machine running attended.

705

706

!WARNING!

!INJURY/SHOCK

HAZARD

To avoid shock or

accidental starting,707

701

get a manual.

! WARNING!

UNSTABLE WORKPIECE

HAZARD!

disconnect power before adjusting or servicing machine.

!WARNING!

EYE INJURY HAZARD Always wear ANSI- approved safety glasses or a face shield when using this equipment.

Workpieces that cannot be supported or stablized without a vise or jig should not be cut on a vertical metal-cutting bandsaw. Such workpieces can unexpectedly move while cutting and draw the operator’s hands into the blade, causing serious personal injury. Examples are chains, cables, round or oblong-shaped workpieces, workpieces with internal or built-in moving or rotating parts, etc.

708

713

NOTICE

Only change speeds when the machine is running.

712

		SPEED
	W	F
		A
	O		S
			T
L
S
		703

!WARNING!

INJURY HAZARD!

Keep door closed while machine is operating. Disconnect power before opening door.

711

709

! WARNING!

CUTTING HAZARD Always keep hands and body away from blade when machine is running.

710

SB 04

706

!WARNING!

!INJURY/SHOCK

HAZARD

To avoid shock or accidental starting, disconnect power before adjusting or servicing machine.

REF	PART #	DESCRIPTION
701	PSBLABEL09VL	EYE INJURY HAZARD LABEL
702	PSBLABEL01VL	READ MANUAL LABEL
703	PSBLABEL14VS	CLOSE DOOR WARNING LABEL
704	PSB1040704	MACHINE ID LABEL (SB1040)
704	PSB1041704	MACHINE ID LABEL (SB1041)
705	PSB1040705	UNSTABLE WORKPIECE LABEL
706	PSBLABEL02HL	SHOCK HAZARD LABEL
707	PSBLABEL18	ALLEN BRADLEY CONTROLS LABEL

REF	PART #	DESCRIPTION
708	PSBLABEL15L	ELECTRICITY LABEL
709	PSBLABEL14HL	CUTTING HAZARD LABEL
710	PSB1040710	MODEL NUMBER LABEL (SB1040)
710	PSB1041710	MODEL NUMBER LABEL (SB1041)
711	PSBPAINT01	SB GRAY TOUCH-UP PAINT
712	PSB1040712	SPEED DIRECTION LABEL
713	PSB1040713	CHANGE SPEED NOTICE LABEL

The safety labels provided with your machine are used to make the operator aware of the machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of these safety labels. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at (360) 734-1540 or www.southbendlathe.com to order new labels.

-67-