CLEANING SEZ SERIES COUNTERTOP STEAMERS
PAGE 16 OPERATOR’S MANUAL 1183437
CLEANING
CLEANING
Southbend equipment is constructed with the best qualit y materials and is designed to provide durable
service when properly maintained. To expect the best perform ance, your equipm ent must be m aintained in
good condition and cleaned daily. Naturally, the frequency and extent of cleaning depen ds on the amount
and degree of usage.
Following daily and more extensive periodic maintenance procedures will incr e as e th e l if e of your equ ipm ent.
Climatic conditions (i.e., salt air, seasonings, and water q uality) may result in the need f or more thorough and
more frequent cleaning in order to keep equipment perf orming at optimal levels.
! WARNING: BURN HAZARD
For proper and safe operation, this steamer must be clea ned daily as described in this manual.
Failure to do so could result in serious injury or damage.
Drains must be kept clean and clear of debris.
! WARNING: SHOCK HAZARD
DO NOT GET WATER IN THE CONTROLS.
This could result in expensive repairs and/or electr ical shock.
De-energize all power to equipment before cleaning the e quipment.
DAILY CLEANING
1. Turn lever to the “OFF” positio n.
2. Remove pan guides.
3. Clean all interior surfaces with soap, water, and a non-metallic pad. Occasiona l use of a deliming
solution such as Lime-A-Way is recommended. RINSE TH OROUGHLY WITH CLEAN WATER.
4. Ensure drain opening is clear.
5. Clean drain cover.
6. Replace pan guides.
7. Leave the door open at night after cleaning to prolong the life of the gasket.
NOTICE
DO NOT USE high-chlorine or bleach solution for cleaning the door gasket.
DO NOT USE steel wool or other metallic pads in the ste amer.
PERIODIC CLEANING
• If lime or mineral deposits start to build up in the interior, clean the unit b y using Sou thbend “desc aler” or
other non-caustic deliming solution. Follow manufacturer’s recomm ended proc edures . Thor ough ly rinse
out unit with clean water.
• To remove normal dirt, grease, or product residue from stainless steel, use ord inary soap and water
applied with a sponge or cloth. Dry thoroughly with a clean cloth. Never use vinegar or any corrosive
cleaner.