Southbend SSB-45, SSB-32, SSB-36 owner manual Mounting Broiler on Stand, A Mount On Heavy Duty Stand

INSTALLATION RADIANT STEAKHOUSE BROILER

STEP 2A: MOUNT ON HEAVY DUTY STAND

The stand is crated separately, but is shipped with the broiler. Depending on the shipping requirements, the broiler may already be assembled to the stand.

1.The broiler will be attached to the stand using four ¼"-20 bolts and lock washers provided with the stand. Remove the bolts and lock washers from the stand.

2.Lift the broiler (using two people is recommended). (Depending on the size and weight of the unit, it may be helpful to remove the griddle plate before lifting the broiler. To do so, remove the body sides to access griddle plate mounting bolts.) Place the broiler on the stand so the holes in the mounting flange align with the corresponding holes in the stand. The valve panel flange should sit flush with front frame of the stand. Secure the broiler to the stand with the ¼"-20 bolts and lock washers.

3.Go on to Step 3.

Figure 4

Mounting Broiler on Stand

If assembled broiler is too heavy to lift, remove side panels

and then remove griddle top by removing four bolts.

Fasten broiler to stand with four 1/4-inch bolts here.

PAGE 12 OF 20 OWNER’S MANUAL 1190950 (02/09)