Southwestern Bell GH3060 Caller ID Operation, Receiving a Call, Receiving Call Waiting Caller ID

Caller ID Operation

Caller ID Operation (Cont.)

Receiving a Call

1.After the first ring, the caller`s name and telephone number will be displayed on the handset screen.

IMPORTANT:

You must subscribe to Call Waiting and Call Waiting Caller ID service from your local telephone company in order to receive Call Waiting Caller ID information

To Store a Caller ID Record to Speed Dial Memory

Note:

You can store a Caller ID record from the handset to Speed Dial Memory.

Reviewing All Call Recor ds

1.After you have reviewed all of the new calls (see page 25), press the " *" or "# " button on the handset. The displays will show the calls stored in memory.

The Caller ID information (up to 64 callers ) will be stored in the handset display in the order received. If the received call information is the same as any of the new calls, the unit will display the "RPT" icon to indicate a repeat call. If the unit receives more than 64 calls, the oldest Caller ID information will be erased. The New Call LED will flash until you review all your new calls.

Note:

If you answer your incoming call before the second ring, the unit will not display the call information.

Receiving Call Waiting Caller ID

when you are on an existing phone call, your GH3060 will display incoming Call Waiting Caller ID information.

1.You will hear a beep and the telephone will be muted momentarily while the display show the second caller Caller ID information.

2.When you access the Call Waiting, the Caller ID information will disappear and the Time/Day screen will be display.

Reviewing Calls

Reviewing New Call Records

1.When the display shows the current date/ time, press the " * " or " # " button on the handset to display the information for the last new call received.

Note:

You can review up to 64 New Caller ID calls from the handset.

2.Continue pressing " * " or " # " button to review all new call records in the order the calls were received.

When a name received exceeds 12 characters, the first 12 characters will be shown with " " showing on the right hand side. Press the

" # " button to view the remaining characters.

3.After the final call has been displayed, press the " *" or "# " button again. The New Call LED will stop blinking and the LCD will show "END NEW CALL"

Note:

If you do not review all new calls, the Time/ Date screen will display after 20 seconds and the new call counter will show the total number of new calls received ( including those you just reviewed ).

Base will only show incoming call and does not have Review function.

1.When the handset display shows the current time/day, press the " *" or "# " button to select the Caller ID record you want to store to Speed Dial Memory

2.Press the "MEM" button on the handset

3.The display will show "LOCATION? x", with "x" representing the first empty memory location.

4.Press the "MEM" button again to confirm that you want to save the telephone number to that particular memory location number. If you want to choose another memory location number, press " *" or "# " or enter in the desired memory location, using the handset keypad. The display will show "MEM x STORED".

You can review up to 64 Caller ID calls from the handset.

2.Once in the Caller ID review mode, press the "*" or "# " button. The LCD display will show the calls stored in memory.

3.Continue to press " *" button to display all records in the order they were received from the oldest to the newest, or "# " button from the newest to the oldest.

4.After the last call record has been reviewed, the LCD will show "--END--"

Caller ID Redial

THE LOCAL AREA CODE MUST BE PROGRAMMED IN ORDER TO FULLY UTILIZE THE REDIAL FEATURE (SEE PAGE 11). The GH3060 allows you to redial a phone number stored in the Caller ID memory.

1.When the display shows the current time/ day, press the "*" or "# " button on the handset to select the Caller ID record that you want to dial.

Note:

- You can review and redial up to 64 Caller ID calls from the handset.

2.Press and release the "CALLS" button on the handset. The number will scroll across the screen from left to right as it is dialed.

Note:

-If you review the Caller ID call from the handset, then you will need to redial the call from the handset (by pressing the "CALLS" button).

25 26