SOYO SY-7IS2 user manual Soyo Combo Setup

BIOS Setup Utility SY-7IS2

3-1 SOYO COMBO SETUP

This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS

[SOYO COMBO SETUP].

After the hardware installation is complete, turn the power switch on, then press the <DEL> key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then, select the [SOYO COMBO SETUP] option from the main menu and press the <Enter> key.

CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software

Soyo Combo Feature

CPU Host/ PCI Clock/ PC133			[100/ 33 MHz]	5	Item Help
CPU Clock Ratio			[X 3]
CPU L2 Cache ECC Checking			[Enabled]		Menu Level 4
Auto Detect DIMM/ PCI CLK			[Enabled]
Spread Spectrum			[Disabled]
C.I.H. 4-WAY Protection			[Enabled]
Onboard codec control			[Enabled]
Quick Power On Self Test			[Enabled]
System Memory Frequency			[Auto]
SDRAM CAS Latency Time			[3]
SDRAM Cycle Time Tras/ Trc			[7/ 9]
SDRAM RAS-to-CAS Delay			[3]
SDRAM RAS Precharge Time			[3]
First Boot Device			[Floppy]
Second Boot Device			[HDD-0]
Third Boot Device			[LS120]
Boot Other Device			[Enabled]
AC97 Audio			[Auto]
AC97 Modem			[Auto]	6
áâà: Move	Enter : Select	+ / - / PU / PD : Value F10 : Save ESC : Exit F1: General Help
F5 : Previous Values			F6 : Fail – Safe Defaults		F7 : Optimized Defaults

The [SOYO COMBO SETUP] menu combines the main parameters that

you need to configure, all in one menu, for a quick setup in BIOS.

53