SOYO SY-7IS2 user manual Boot Up NumLock Status, Gate A20 Options, Typematic Settings

BIOS Setup Utility			SY-7IS2
3-3.5 Boot Up NumLock Status
	Setting	Description	Note
Boot Up
	On	Puts numeric keypad in	Default
NumLock		NumLock mode at boot-up.
Status	Off	Puts numeric keypad in arrow key
		mode at boot-up.
3-3.6 Gate A20 Options
	Setting	Description	Note
Gate A20
	Normal	Lets chipset control GateA20.
Options	Fast	A pin in the keyboard controller	Default
		controls GateA20.
3-3.7 Typematic Settings

Typematic Settings

Typematic

Rate Setting

Setting	Description	Note
Disabled	Keystrokes repeat at a rate	Default
	determined by the
	keyboard.
Enabled	When enables , the
	typematic rate and
	typematic delay can be
	selected.

The following [Typematic Rate] and [Typematic Delay] fields are active only if [Typematic Rate Setting] is set to [Enabled]

Typematic Rate

6(Char/sec)

8(Char/sec)

10(Char/sec)

12(Char/sec)

15(Char/sec)

20(Char/sec)

24(Char/sec)

30(Char/sec)

Choose the rate at which a Default character is repeated when holding down a key.

Typematic Delay

250 (msec)	Choose how long after	Default
500 (msec)	you press a key down the
750 (msec)	character begins
1000 (msec)	repeating.

62