Speco Technologies D4RS, D16RS, D8RS manual Connection Period, Send Email

PRIMARY SNTP SERVER: Input the address of the primary NTP time-server.

SECONDARY SNTP SERVER: Input the address of the secondary NTP time-server.

TIME ZONE: NTP synchronizes with GMT (Greenwich Mean Time) regardless of geography, user must set their own time difference.

CONNECTON MODE: Select the NTP time-server connection mode from TIME, INTERVAL, and ONCE.

CONNECTION PERIOD

-TIME – Refresh the time at the designated time (e.g. 1AM)

-INTERVAL – Every 1 hour ~ 24 hours

-ONCE – Synchronizes time only once. NTP will not synchronize unless the Connection Mode is changed.

SEND EMAIL

TRANSMISSION MODE: Sending an image of an event channel.

IP NOTIFICATION: Enable/disable sending e-mail when the IP address is changed.

MAIL BY MOTION: Enable/disable sending e-mail when the motion is detected.

MAIL BY SENSOR: Enable/disable sending e-mail when sensor input is received (Only applies to D8RS, D16RS models)

MAIL BY VIDEO LOSS: Enable/disable sending e-mail when the video loss is detected.

MAIL BY S.M.A.R.T.: Enable/disable sending e-mail when S.M.A.R.T. is triggered.

MAIL PORT: Assign Mail Port number.

SEURE OPTION: Select the secure mail server connection method. (SSL or TLS)

MAIL TO: Enter the appropriate email address to enable sending e-mail reports using a virtual keyboard.

MAIL SERVER: Enter the appropriate mail server information.

22