Speco Technologies D4RS, D16RS, D8RS manual Appendix E-Sata Connection

APPENDIX: E-SATA CONNECTION

Please read the following instructions before using the E-SATA port. Failure to do so may cause serious damage to the recorded video.

SPECO is not responsible for data loss caused by improper usage.

∙Use ONLY a new HDD or a HDD that is pre-formatted on a PC.

∙Turn off the DVR before plugging the E-SATA HDD.

∙DO NOT disconnect the E-SATA port while the DVR power is on.

∙The purpose of the E-SATA port is to extend recording capacity.

∙Once connected, DO NOT remove or disconnect the E-SATA port from the DVR.

∙The E-SATA port does not support the hot swappable function.

94