Speco Technologies D4RS, D16RS, D8RS manual Setup Display Mode, Osd, OSD Contrast, Name, Covert

4-5. Setup – DISPLAY Mode

In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below. Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item. To return to the previous setup menu screen, press the ESC button.

	Figure 4.5.1. DISPLAY Setup Screen
	Table 4.5.1. Menu Items in DISPLAY Setup Screen
Item	Description
OSD	Enable/disable on-screen-display.
OSD CONTRAST	Set the visibility level of the On Screen Display (OSD) (0~100)
SEQUENCE	Enable/disable sequential display of video in full screen mode.
SEQUENCE	Set the dwell time of each,
DWELL TIME	single channel display in sequential display mode (3~60seconds)
SITE	Select a channel to apply the name and covert settings change using the
	mouse or control button on the remote control.
	Select a channel to apply the following settings using the mouse.
NAME	Set the channel name. Press the right square button and set the channel
	name and select OK using the mouse.
	The name can be made up to 36 characters.
COVERT	Enable/disable display of the specified video channel in live display.

31