47

3.3.8.2Prohibition setting

Set up prohibition time to transmit the e-mail. Users can enter prohibition time from the starting time and the ending time of transmitting the e-mail

3.3.8.3SMTP Server IP address

Configure the IP address of the SMTP server to transmit the e-mail.

If you do not know your SMTP server IP address then go to Command Prompt in Windows, then use ping and SMTP name address eg mail.specotech.com as below to get your SMTP IP address. (Same method also applies to finding FTP server IP address from FTP name address).

(Please note IP 209.35.183.211 is only for Speco Technologies' employees and will not work for your set-up).

C:\>ping specotech.com

Pinging specotech.com [209.35.183.211] with 32 bytes of data:

Reply from 209.35.183.211: bytes=32 time=342ms TTL=114

Reply from 209.35.183.211: bytes=32 time=344ms TTL=114

Reply from 209.35.183.211: bytes=32 time=347ms TTL=114

Reply from 209.35.183.211: bytes=32 time=350ms TTL=114

Ping statistics for 209.35.183.211:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds:

Minimum = 342ms, Maximum = 350ms, Average = 345ms

Users can select authentication process dependent on SMTP server requirement.

Selects on/off for authentication process do authentication process whenever transmitting e- mail messages through SMTP server.

3.3.8.4Authentication

Users can select authentication process dependent on SMTP server requirement.

Selects on/off for authentication process do authentication process whenever transmitting e- mail messages through SMTP server.

Page 47
Image 47
Speco Technologies DVR-T4IP user manual Prohibition setting, Smtp Server IP address, Authentication