Speco Technologies DVR-T4IP Power On/Off, Date & time setting, Password setting procedure

24

2. Basic operation procedures

2.1 Power On/Off

2.1.1Power on

Using either the keypad or the remote control, press the “Power” button. (Note: In case of power outage or rare instance of system failure, the DVR will reboot automatically)

The Power LED light will turn from red to green when it has turned on properly.

In a standby mode, the LED is red.

2.1.2Power OFF

In order to shutdown the system, you must type in the password. The default password for

shutdown is “111111”.

2.2 Date & time setting

Set the date and time for the DVR.

(System Setup in Main Menu Time/Date)

2.3 Password setting procedure

Select or change your password for the DVR. The password must be a 6-digit number consisting of numbers 0 ~ 4.

(System Setup in Main Menu System Password)

2.4 Network setting

There are three types of network setting for the DVR: Static, DHCP, or PPPoE. Please set the network type. (Network Setup in Main Menu)

2.5 Recording

Select recording related parameters in the Record Setup in the main menu.