5. BATTERY
The CNB460 is a high performance
CAUTION
To avoid risk of explosion and injury, CNB460 battery pack should only be removed, charged or recharged in
5.1 BATTERY CHARGING
If the radio has never been used, or its charge is depleted, it may be charged by connecting the
5.2 BATTERY REMOVAL/INSTALLATION
1.Turn the transceiver off.
2.To remove, open the Battery Pack Latch on the bottom of the trans- ceiver, then slide the battery downward and out from the transceiver.
3.To install, insert the battery pack into the battery compartment on the back of the transceiver, then close the Battery Pack Latch until it locks in place with a “click.”
Close the Battery Pack Latch
Figure 6
Page 22 | HX460S |