Select IBM code page Mode ASCII Decimal Hexadecimal
Both <ESC> “[” “T” <4> <0> 27 91 84 4 0 18 58 54 04 00
CO> CO> nl n2 0 0 nl n2 00 00 nl n2
Changes the code page of the current IBM character set according
to the values of nl and n2.
nl n2 Code page
1 181 #437 U.S.A.
3 82 #850 Multi-lingual
3 92 #860 Portuguese
3 93 #86 1 Icelandic
3 95 #863 Canadian French
3 97 #865 Nordic
These code pages can be selected as power-up defaults by EDS
switches D-2 to D-4.
Enable printing of all character codes Mode ASCII Decimal Hexadecimal
IBM <ESC> 7” nl n2 27 92 nl n2 I IB 5C nl n2
Enables printing of all characters in the IBM character set, including
those assigned to character codes which are normally considered
control codes. This command remains in effect for the next nl + n2
x 256 characters, where nl and n2 are numbers between 0 and 255.
During this interval no control functions are executed. If a code with
no assigned character is received, the printer prints a space.
Enable printing of all character codes on next character Mode ASCII Decimal Hexadecimal
IBM <ESC> “ h ” 27 94 1B 5E
This command operates like <ES0 ‘T’ except that it remains in
effect for only one character.
54