User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

snmp-server enable traps

This command enables the Authentication Flag.

Default

enabled

Format

snmp-server enable traps

Mode

Global Config

no snmp-server enable traps

This command disables the Authentication Flag.

Format

no snmp-server enable traps

Mode

Global Config

snmp-server enable traps bcaststorm

This command enables the broadcast storm trap. When enabled, broadcast storm traps are sent only if the broadcast storm recovery mode setting associated with the port is enabled .

Default

enabled

Format

snmp-server enable traps bcaststorm

Mode

Global Config

no snmp-server enable traps bcaststorm

This command disables the broadcast storm trap. When enabled, broadcast storm traps are sent only if the broadcast storm recovery mode setting associated with the port is enabled .

Format

no snmp-server enable traps bcaststorm

Mode

Global Config

snmp-server enable traps linkmode

This command enables Link Up/Down traps for the entire switch. When enabled, link traps are sent only if the Link Trap flag setting associated with the port is enabled (see ‘snmp trap link- status’ command).

Default

enabled

Format

snmp-server enable traps linkmode

 

 

8-32

Switching Commands

202-10088-01, March 2005

Page 100
Image 100
NETGEAR NETGEAR Snmp-server enable traps bcaststorm, Snmp-server enable traps linkmode, No snmp-server enable traps