NETGEAR NETGEAR Spanning-tree mst vlan, Spanning-tree port mode, No spanning-tree mst vlan

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command sets the Bridge Priority parameter for the common and internal spanning tree to the default value, i.e. 32768.

Format	spanning-tree mst priority <mstid>
Mode	Global Config

spanning-tree mst vlan

This command adds an association between a multiple spanning tree instance and a VLAN. The VLAN will no longer be associated with the common and internal spanning tree. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The <vlanid> corresponds to an existing VLAN ID.

Format	spanning-tree mst vlan <mstid> <vlanid>
Mode	Global Config

no spanning-tree mst vlan

This command removes an association between a multiple spanning tree instance and a VLAN. The VLAN will again be associated with the common and internal spanning tree. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The <vlanid> corresponds to an existing VLAN ID.

Format	no spanning-tree mst vlan <mstid> <vlanid>
Mode	Global Config

spanning-tree port mode

This command sets the Administrative Switch Port State for this port to enabled.

Default	disabled
Format	spanning-tree port mode
Mode	Interface Config

no spanning-tree port mode

This command sets the Administrative Switch Port State for this port to disabled.

Format	no spanning-tree port mode
Mode	Interface Config
Switching Commands	8-125

202-10088-01, March 2005