NETGEAR NETGEAR user manual System Log Syslog, Configscript validate

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

configscript validate

This command validates a configuration script file by parsing each line in the script file where <scriptname> is the name of the script to be validated. The validation will stop at the first failure of a command..

Format	configscript validate <scriptname>
Mode	Privileged EXEC

show running-config

This command is used to display/capture the current setting of different protocol packages supported on switch. This command displays/captures only commands with settings/ configurations with values that differ from the default value. The output is displayed in script format, which can be used to configure another switch with the same configuration.

When a script name is provided, the output is redirected to a configuration script. The option [all] will also enable the display/capture of all commands with settings/configurations that include values that are same as the default values. If the optional <scriptname> is provided with a file name extension of “.scr”, the output will be redirected to a script file.

Format	show running-config [all] [<scriptname>]
Mode	Privileged EXEC

System Log (Syslog)

This section provides a detailed explanation of the Syslog commands. The commands are divided into two functional groups:

•Show commands display spanning tree settings, statistics, and other information.

•Configuration Commands configure features and options of the device. For every configuration command there is a show command that displays the configuration setting.

8-66 Switching Commands

202-10088-01, March 2005