NETGEAR NETGEAR user manual Show classofservice ip-precedence-mapping, Show classofservice trust

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

show classofservice ip-precedence-mapping

This command displays the current IP Precedence mapping to internal traffic classes for a specific interface. The slot/port parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the IP Precedence mapping table of the interface is displayed. If omitted, the most recent global configuration settings are displayed.

Format	show classofservice ip-precedence-mapping [slot/port]
Mode	Privileged EXEC

The following information is repeated for each user priority.

IP Precedence	The IP Precedence value.
Traffic Class	The traffic class internal queue identifier to which the IP Prece-
	dence value is mapped.

show classofservice trust

This command displays the current trust mode setting for a specific interface. The slot/port parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the port trust mode of the interface is displayed. If omitted, the port trust mode of each interface in the system is shown. If the platform does not support independent per-port class of service mappings, the output represents the system-wide port trust mode used for all interfaces.

Format	show classofservice trust [slot/port]
Mode	Privileged EXEC
Non-IP Traffic	ClassThe traffic class used for non-IP traffic. This is only dis-
	played when the COS trust mode is set to either 'trust ip-dscp' or
	'trust ip-precedence'.
Untrusted Traffic Class	The traffic class used for all untrusted traffic. This is only dis-
	played when the COS trust mode is set to 'untrusted'.

show interfaces cos-queue

This command displays the class-of-service queue configuration for the specified interface. The slot/port parameter is optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the class-of-service queue configuration of the interface is displayed. If omitted, the most recent global configuration settings are displayed.

Format	show interfaces	cos-queue [slot/port]
Mode	Privileged EXEC
11-46		Quality of Service (QoS) Commands

202-10088-01, March 2005