NETGEAR NETGEAR user manual Typographical Conventions, Special Message Formats

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

•Chapter 10, “Routing Commands” describes the Routing commands.

•Chapter 11, “Quality of Service (QoS) Commands” describes the QOS commands.

•Chapter 12, “Managing Switch Stacks” describes the switch stacking.

Note: Refer to the release notes for the 7000 Series L3 Managed Switch Software application level code. The release notes detail the platform specific functionality of the Switching, Routing, SNMP, Config, Management, and Bandwidth Provisioning packages.

Typographical Conventions

This guide uses the following typographical conventions:

Table 1.	Typographical conventions
italics		Emphasis.
bold		User input.
[Enter]		Named keys in text are shown enclosed in square brackets. The notation [Enter]
		is used for the Enter key and the Return key.
[Ctrl]+C		Two or more keys that must be pressed simultaneously are shown in text linked
		with a plus (+) sign.
SMALL CAPS		DOS file and directory names.

Special Message Formats

This guide uses the following formats to highlight special messages:

Note: This format is used to highlight information of importance or special interest.

This manual is written for the 7300S Series L3 Switch according to these specifications:

Table 1-1. Manual Specifications

Product Version	NETGEAR 7300S Series Layer 3 Managed Switch
Manual Publication Date	March 2005

1-2 About This Guide

202-10088-01, March 2005