NETGEAR NETGEAR Hypertext Transfer Protocol Http Commands, Ip ssh protocol, Show ip ssh

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Mode Privileged EXEC

no ip ssh

This command is used to disable SSH.

Format	no ip ssh
Mode	Privileged EXEC

ip ssh protocol

This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.

Default	1 and 2
Format	ip ssh protocol [1] [2]
Mode	Privileged EXEC

show ip ssh

This command displays the ssh settings.

Format	show ip ssh
Mode	Privileged EXEC

Administrative Mode	This field indicates whether the administrative mode of SSH is
	enabled or disabled.
Protocol Level	The protocol level may have the values of version 1, version 2 or
	both versions 1 and version 2.

Connections This field specifies the current ssh connections.

Hypertext Transfer Protocol (HTTP) Commands

This section provides a detailed explanation of the HTTP commands. The commands are divided into the following groups:

•Configuration commands are used to configure features and options of the switch. For every configuration command there is a show command that will display the configuration setting.

•Show commands are used to display switch settings, statistics and other information.

Security Commands 9-23

202-10088-01, March 2005