NETGEAR NETGEAR Users snmpv3 accessmode, Users snmpv3 authentication, No users snmpv3 accessmode

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

users snmpv3 accessmode

This command specifies the snmpv3 access privileges for the specified login user. The valid accessmode values are readonly or readwrite. The <username> is the login user name for which the specified access mode applies. The default is readwrite for ‘admin’ user; readonly for all other users

Default	admin -- readwrite; other -- readonly
Format	users snmpv3 accessmode <username> <readonly read-
	write>
Mode	Global Config

no users snmpv3 accessmode

This command sets the snmpv3 access privileges for the specified login user as readwrite for the ‘admin’ user; readonly for all other users. The <username> is the login user name for which the specified access mode will apply.

Format	no users snmpv3 accessmode <username>
Mode	Global Config

users snmpv3 authentication

This command specifies the authentication protocol to be used for the specified login user. The valid authentication

protocols are none, md5 or sha. If md5 or sha are specified, the user login password is also used as the snmpv3 authentication password and therefore must be at least eight characters in length. The <username> is the login user name associated with the authentication protocol.

Default	no authentication
Format	users snmpv3 authentication <username> <none md5
	sha>
Mode	Global Config

no users snmpv3 authentication

This command sets the authentication protocol to be used for the specified login user to none. The <username> is the login user name for which the specified authentication protocol will be used.

Format	users snmpv3 authentication <username>
Mode	Global Config
8-80	Switching Commands

202-10088-01, March 2005