NETGEAR NETGEAR user manual Show vlan brief, Show vlan port, Port Vlan ID

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Untagged - specifies to transmit traffic for this VLAN as untagged frames.

show vlan brief

This command displays a list of all configured VLANs.

Format	show vlan brief
Mode	Privileged EXEC and User EXEC
VLAN ID	There is a VLAN Identifier (vlanid )associated with each VLAN.
	The range of the VLAN ID is 1 to 4094.
VLAN Name	A string associated with this VLAN as a convenience. It can be
	up to 32 alphanumeric characters long, including blanks. The
	default is blank. VLAN ID 1 always has a name of `Default`. This
	field is optional.
VLAN Type	Type of VLAN, which can be Default, (VLAN ID = 1), a static
	(one that is configured and permanently defined), or a Dynamic
	(one that is created by GVRP registration).

show vlan port

This command displays VLAN port information.

Format	show vlan port {<slot/port> all}
Mode	Privileged EXEC and User EXEC
Slot/Port	Valid slot and port number separated by forward slashes. It is pos-
	sible to set the parameters for all ports by using the selectors on
	the top line.
Port VLAN ID	The VLAN ID that this port will assign to untagged frames or pri-
	ority tagged frames received on this port. The value must be for
	an existing VLAN. The factory default is 1.

Acceptable Frame Types Specifies the types of frames that may be received on this port. The options are 'VLAN only' and 'Admit All'. When set to 'VLAN only', untagged frames or priority tagged frames received on this port are discarded. When set to 'Admit All', untagged frames or priority tagged frames received on this port are accepted and assigned the value of the Port VLAN ID for this

8-58 Switching Commands

202-10088-01, March 2005