NETGEAR NETGEAR Show dot1x users, Show users authentication, Users defaultlogin, Users login

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

show dot1x users

This command displays 802.1x port security user information for locally configured users.

Format	show dot1x users <slot/port>
Mode	Privileged EXEC
User	Users configured locally to have access to the specified port.

show users authentication

This command displays all user and all authentication login information. It also displays the authentication login list assigned to the default user.

Format	show users authentication
Mode	Privileged EXEC
User	This field lists every user that has an authentication login list assigned.
System Login	This field displays the authentication login list assigned to the user for system
	login.
802.1x Port Security	This field displays the authentication login list assigned to the user for 802.1x
	port security.

users defaultlogin

This command assigns the authentication login list to use for non-configured users when attempting to log in to the system. This setting is overridden by the authentication login list assigned to a specific user if the user is configured locally. If this value is not configured, users will be authenticated using local authentication only.

Format	users defaultlogin <listname>
Mode	Global Config

users login

This command assigns the specified authentication login list to the specified user for system login. The <user> must be a configured <user> and the <listname> must be a configured login list.

If the user is assigned a login list that requires remote authentication, all access to the interface from all CLI, web, and telnet sessions will be blocked until the authentication is complete.

9-16 Security Commands

202-10088-01, March 2005