Data Frames Forwarded by the CPU the CPU.
VLANS Enabled for IGMP Snooping enabled.

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Fast-leave admin mode should be enabled only on VLANs where only one host is connected to each layer 2 LAN port, to prevent the inadverdent dropping of the other hosts that were connected to the same layer 2 LAN port but were still interested in receiving multicast traffic directed to that group. Also, fast-leave processing is supported only with IGMP version 2 hosts.

Default

disable

Format

set igmp fast-leave <vlanId>

Mode

Vlan Mode

no set igmp fast-leave

 

This command disables IGMP Snooping fast-leave admin mode on a selected VLAN.

Format

no set igmp fast-leave <vlanId>

Mode

Vlan Mode

show igmpsnooping

This command displays IGMP Snooping information. Configured information is displayed whether or not IGMP Snooping is enabled.

Format

show igmpsnooping <vlanId>

Mode

Privileged EXEC

This display parameters when the optional argument ‘<vlanId>’ is not used are as follows:

Admin Mode This indicates whether or not IGMP Snooping is active on the switch.

Interfaces Enabled for IGMP Snooping This is the list of interfaces on which IGMP Snooping is enabled.

Multicast Control Frame Count This displays the number of multicast control frames that are pro- cessed by the CPU.

This displays the number of data frames that are forwarded by

This is the list of VLANS on which IGMP Snooping is

The display parameters when the argument is ‘<vlanId>’ are as follows:

VLAN Admin Mode This indicates whether or not IGMP Snooping is active on the VLAN.

8-112

Switching Commands

202-10088-01, March 2005

Page 180
Image 180
NETGEAR NETGEAR user manual No set igmp fast-leave, Format