User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Format

radius

server

retransmit <retries>

Mode

Global

Config

 

no radius server retransmit

This command sets the maximum number of times a request packet is re-transmitted, when no response is received from the RADIUS server, to the default value, i.e. 10.

Format

no radius server retransmit

Mode

Global Config

radius server timeout

This command sets the timeout value (in seconds) after which a request must be retransmitted to the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30.

Default

6

Format

radius server timeout <seconds>

Mode

Global Config

no radius server timeout

 

This command sets the timeout value (in seconds) after which a request must be retransmitted to the RADIUS server if no response is received, to the default value, i.e. 6.

Format

no radius server timeout

Mode

Global Config

show radius

This command is used to display the various RADIUS configuration items for the switch as well as the configured RADIUS servers. If the optional token 'servers' is not included, the following RADIUS configuration items will be displayed.

Format

show radius [servers]

Mode

Privileged EXEC

Primary Server IP Address Indicates the configured server currently in use for authenti- cation

9-20

Security Commands

202-10088-01, March 2005

Page 226
Image 226
NETGEAR NETGEAR user manual Radius server timeout, Show radius, No radius server retransmit, No radius server timeout