NETGEAR NETGEAR user manual Show ip rip interface

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

show ip rip interface

This command displays information related to a particular RIP interface.

Format	show ip rip interface <slot/port>
Mode	Privileged EXEC and User EXEC
Interface	Valid slot and port number separated by forward slashes. This is a
	configured value.
IP Address	The IP source address used by the specified RIP interface. This is
	a configured value.
Send version	The RIP version(s) used when sending updates on the specified
	interface. The types are none, RIP-1, RIP-1c, RIP-2. This is a
	configured value.
Receive version	The RIP version(s) allowed when receiving updates from the
	specified interface. The types are none, RIP-1, RIP-2, Both. This
	is a configured value.
Both RIP Admin Mode	RIP administrative mode of router RIP operation; enable acti-
	vates, disable de-activates it. This is a configured value.
Link State	Indicates whether the RIP interface is up or down. This is a con-
	figured value.
Authentication Type	The RIP Authentication Type for the specified interface. The
	types are none, simple, and encrypt. This is a configured value.
Default Metric	A number which represents the metric used for default routes in
	RIP updates originated on the specified interface. This is a con-
	figured value.
The following information will be invalid if the link state is down.
Bad Packets Received	The number of RIP response packets received by the RIP process
	which were subsequently discarded for any reason.
Bad Routes Received	The number of routes contained in valid RIP packets that were
	ignored for any reason.
Updates Sent	The number of triggered RIP updates actually sent on this inter-
	face.

10-30 Routing Commands

202-10088-01, March 2005