NETGEAR NETGEAR user manual Show ip brief, Show ip interface

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Mode Interface Config

show ip brief

This command displays all the summary information of the IP. This command takes no options.

Format	show ip brief
Mode	Privileged EXEC and User EXEC
Default Time to Live	The computed TTL (Time to Live) of forwarding a packet from
	the local router to the final destination.
Router ID	Is a 32 bit integer in dotted decimal format identifying the router, about which
	information is displayed. This is a configured value.
Routing Mode	Shows whether the routing mode is enabled or disabled.
IP Forwarding Mode	Shows whether forwarding of IP frames is enabled or disabled.
	This is a configured value.

show ip interface

This command displays all pertinent information about the IP interface.

Format	show ip interface <slot/port>
Mode	Privileged EXEC and User EXEC
IP Address	Is an IP address representing the subnet configuration of the
	router interface. This value was configured into the unit.
Subnet Mask	Is a mask of the network and host portion of the IP address for the
	router interface. This value was configured into the unit.
Routing Mode	Is the administrative mode of router interface participation. The
	possible values are enable or disable. This value was configured
	into the unit.
Administrative Mode	Is the administrative mode of the specified interface. The possible
	values of this field are enable or disable. This value was config-
	ured into the unit.

Forward Net Directed Broadcasts Displays whether forwarding of network-directed broadcasts is enabled or disabled. This value was configured into the unit.

Active State	Displays whether the interface is active or inactive. An interface
	is considered active if its link is up and it is in forwarding state.
Routing Commands	10-11

202-10088-01, March 2005