NETGEAR NETGEAR user manual Chapter Mode-based CLI

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Chapter 7

Mode-based CLI

The CLI groups all the commands in appropriate modes according to the nature of the command. A sample of the CLI command modes are described below. Each of the command modes support specific 7300S Series L3 Switch commands.

•User Exec Mode

•Privileged Exec Mode

•Global Config Mode

•Vlan Mode

•Interface Config Mode

•Line Config Mode

•Policy Map Mode

•Policy Class Mode

•Class Map Mode

•Router Config RIP Mode

•DHCP Pool Configuration Mode

The Command Mode table captures the command modes, the prompts visible in that mode and the exit method from that mode.

Table 7-1.	Command Mode
Command Mode		Access Method	Prompt	Exit or Access Next
				Mode
User Exec Mode		This is the first level of	Switch>	Enter Logout command
		access. Perform basic
		tasks and list system
		information.
Privileged Exec Mode		From the User Exec	Switch#	To exit this mode, enter
		Mode, enter the enable		exit or press Ctrl-Z.
		command.

Mode-based CLI 7-1

202-10088-01, March 2005