NETGEAR NETGEAR Quick Start up Downloading from Tftp Server, Quick Start up Factory Defaults

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Quick Start up Downloading from TFTP Server

Before starting a TFTP server download, the operator must complete the Quick Start up for the IP Address.

Table 6-7.	Quick Start up Downloading from TFTP Server
Command		Details
copy <url> {nvram:startup-config		Sets the download datatype to be an image
system:image}		or config file.
		The URL must be specified as:
		tftp://ipAddr/filepath/fileName.
		The nvram:startup-config option downloads
		the config file using tftp and system:image
		option downloads the code file.
Quick Start up Factory Defaults

Table 6-8.	Quick Start up Factory Defaults
Command		Details
clear config		Enter yes when the prompt pops up to clear all the configurations
		made to the switch.
copy system:running-config		Enter yes when the prompt pops up that asks if you want to save
nvram:startup-config		the configurations made to the switch.
reload OR Cold Boot the Switch		Enter yes when the prompt pops up that asks if you want to reset
		the system.
		This is the users choice either reset the switch or cold boot the
		switch, both work effectively.

6-6 Quick Start up

202-10088-01, March 2005