NETGEAR NETGEAR user manual Show forwardingdb agetime, Show network

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Allow New Outbound Telnet Sessions Indicates whether outbound telnet sessions will be allowed.

show forwardingdb agetime

This command displays the timeout for address aging. In an IVL system, the [fdbid all] parameter is required.

Default	all
Format	show forwardingdb agetime [fdbid all]
Mode	Privileged EXEC
Forwarding DB ID	Fdbid (Forwarding database ID) indicates the forwarding data-
	base whose aging timeout is to be shown. The all option is used to
	display the aging timeouts associated with all forwarding data-
	bases. This field displays the forwarding database ID in an IVL
	system.
Agetime	In an IVL system, this parameter displays the address aging time-
	out for the associated forwarding database.

show network

This command displays configuration settings associated with the switch's network interface. The network interface is the logical interface used for in-band connectivity with the switch via any of the switch's front panel ports. The configuration parameters associated with the switch's network interface do not affect the configuration of the front panel ports through which traffic is switched or routed.

Format	show network
Mode	Privileged EXEC and User EXEC
IP Address	The IP address of the interface. The factory default value is
	0.0.0.0
Subnet Mask	The IP subnet mask for this interface. The factory default value is
	0.0.0.0
Default Gateway	The default gateway for this IP interface. The factory default
	value is 0.0.0.0

Burned In MAC Address The burned in MAC address used for in-band connectivity.

8-24 Switching Commands

202-10088-01, March 2005