NETGEAR NETGEAR user manual Quick Start up Uploading from Switch to Out-of-Band PC Only, Xmodem

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Quick Start up Uploading from Switch to Out-of-Band PC (Only

XMODEM)

Table 6-5.	Quick Start up Uploading from Switch to Out-of-Band PC (XMODEM)
Command		Details
copy {		The types are:
nvram:startup-config		config - configuration file
nvram:errorlog
nvram:msglog		errorlog - error log
nvram:traplog} <url>
		system trace - system trace
		traplog - trap log
		The URL must be specified as:
		xmodem:filepath/fileName
		This starts the upload and also displays the mode of
		uploading and the type of upload it is and confirms the
		upload is taking place.
		For example:
		If the user is using HyperTerminal, the user must
		specify where the file is going to be received by the
		PC.

Quick Start up Downloading from Out-of-Band PC to Switch (Only XMODEM)

Table 6-6.	Quick Start up Downloading from Out-of-Band PC to Switch (Only XMODEM)
Command		Details
copy <url> {nvram:startup-config		Sets the download datatype to be an image or
system:image}		config file.
		The URL must be specified as:
		xmodem:filepath/fileName
		For example:
		If the user is using HyperTerminal, the user
		must specify which file is to be sent to the
		switch.
		The Switch will restart automatically once the
		code has been downloaded.
Quick Start up		6-5

202-10088-01, March 2005