NETGEAR NETGEAR user manual Show port-channel

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Active Ports	This field lists the ports that are actively participating in this port-
	channel.

show port-channel

This command displays an overview of all port-channels (LAGs) on the switch.

Format	show port-channel {<logical slot/port> all}
Mode	Privileged EXEC
Logical slot/port	Valid slot and port number separated by forward slashes.
Name	The name of this port-channel (LAG). You may enter any string
	of up to 15 alphanumeric characters.
Link State	Indicates whether the Link is up or down.
Admin Mode	May be enabled or disabled. The factory default is enabled.
Link Trap Mode	This object determines whether or not to send a trap when link
	status changes. The factory default is enabled.
STP Mode	The Spanning Tree Protocol Administrative Mode associated
	with the port or port-channel (LAG). The possible values are:
	Disable - Spanning tree is disabled for this port.
	Enable - Spanning tree is enabled for this port.
Mbr Ports	A listing of the ports that are members of this port-channel
	(LAG), in slot/port notation. There can be a maximum of eight
	ports assigned to a given port-channel (LAG).
Port Speed	Speed of the port-channel port.
Type	This field displays the status designating whether a particular
	port-channel (LAG) is statically or dynamically maintained. The
	possible values of this field are Static, indicating that the port-
	channel is statically maintained; and Dynamic, indicating that the
	port-channel is dynamically maintained.

Active Ports This field lists the ports that are actively participating in the port-channel (LAG).

Switching Commands 8-117

202-10088-01, March 2005