User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

show arp brief

This command displays the brief Address Resolution Protocol (ARP) table information.

Format

show arp brief

Mode

Privileged EXEC

Age Time (seconds)

Is the time it takes for an ARP entry to age out. This value was

 

configured into the unit. Age time is measured in seconds.

Response Time (seconds) Is the time it takes for an ARP request timeout. This value was configured into the unit. Response time is measured in sec- onds.

Retries

Is the maximum number of times an ARP request is retried. This

 

value was configured into the unit.

Cache Size

Is the maximum number of entries in the ARP table. This value

 

was configured into the unit.

Dynamic Renew Mode Displays whether the ARP component automatically attempts to renew dynamic ARP entries when they age out.

Total Entry Count Current / Peak Field listing the total entries in the ARP table and the

peak entry count in the ARP table.

Static Entry Count Current / Max Field listing the static entry count in the ARP table and maximum static entry count in the ARP table.

IP Routing

This chapter provides a detailed explanation of the IP Routing commands. The commands are divided by functionality into the following different groups:

Show commands are used to display switch settings, statistics and other information.

Configuration Commands are used to configure features and options of the switch. For every configuration command there is a show command that will display the configuration setting.

Copy commands are used to transfer configuration and informational files to and from the switch.

routing

This command enables routing for an interface.

10-6

Routing Commands

202-10088-01, March 2005

Page 238
Image 238
NETGEAR NETGEAR user manual IP Routing, Show arp brief