NETGEAR NETGEAR Link Aggregation LAG/Port-Channel 802.3AD Commands, Port-channel staticcapability

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Fast Leave Mode	This indicates whether or not IGMP Snooping Fast-leave is active on the
	VLAN.

Group Membership Interval Time The Group Membership Interval time is the amount of time in seconds that a switch will wait for a report from a particular group on a particu- lar interface, which is participating in the VLAN, before deleting the interface from the entry.This value may be configured

Max Response Time This displays the amount of time the switch will wait after sending a query on an interface, participating in the VLAN, because it did not receive a report for a particular group on that interface. This value may be configured.

Multicast Router Present Expiration Time If a query is not received on an interface, participating in the VLAN, within this amount of time, the interface is removed from the list of interfaces with multicast routers attached. This value may be configured.

Link Aggregation (LAG)/Port-Channel (802.3AD) Commands

This section provides a detailed explanation of the LAG commands. The LAG feature initially load balances traffic based upon the source and destination MAC address. If an ARP entry is learned on the LAG then the LAG is converted to load balance based upon source/destination IP address.

The commands are divided into two functional groups:

•Show commands display switch settings, statistics, and other information.

•Configuration commands configure features and options of the switch. For every configuration command, there is a show command that displays the configuration setting.

port-channel staticcapability

This command enables the support of port-channels (static link aggregations - LAGs) on the device. By default, the static capability for all port-channels is disabled.

Default	disabled
Format	port-channel staticcapability
Mode	Global Config

Switching Commands 8-113

202-10088-01, March 2005