NETGEAR NETGEAR user manual Snmptrap ipaddr, Snmptrap mode, No snmptrap mode

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

snmptrap

This command adds an SNMP trap name. The maximum length of name is 16 case-sensitive alphanumeric characters.

Default	The default name for the six undefined community names is
	Delete.
Format	snmptrap <name> <ipaddr>
Mode	Global Config
no snmptrap

This command deletes trap receivers for a community.

Format	no snmptrap <name> <ipaddr>
Mode	Global Config

snmptrap ipaddr

This command assigns an IP address to a specified community name. The maximum length of name is 16 case-sensitive alphanumeric characters.

Note: IP addresses in the SNMP trap receiver table must be unique. If you make multiple entries using the same IP address, the first entry is retained and processed. All duplicate entries are ignored.

Format	snmptrap ipaddr <name> <ipaddrold> <ipaddrnew>
Mode	Global Config

snmptrap mode

This command activates or deactivates an SNMP trap. Enabled trap receivers are active (able to receive traps). Disabled trap receivers are inactive (not able to receive traps).

Format	snmptrap mode	<name> <ipaddr>
Mode	Global Config
no snmptrap mode

This command deactivates an SNMP trap. Disabled trap receivers are inactive (not able to receive traps).

8-34 Switching Commands

202-10088-01, March 2005