NETGEAR NETGEAR user manual Default-metric RIP, Distance rip, No default-information originate RIP

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Format	default-information originate
Mode	Router RIP Config

no default-information originate (RIP)

This command is used to control the advertisement of default routes.

Format	no default-information originate
Mode	Router RIP Config

default-metric (RIP)

This command is used to set a default for the metric of distributed routes.

Format	default-metric <0-15>
Mode	Router RIP Config
no default-metric (RIP)

This command is used to reset the default metric of distributed routes to its default value.

Format	no default-metric
Mode	Router RIP Config

distance rip

This command sets the route preference value of RIP in the router. Lower route preference values are preferred when determining the best route.

Default	15
Format	distance rip <0-255>
Mode	Router RIP Config
no distance rip

This command sets the default route preference value of RIP in the router.

Format	no distance rip
Mode	Router RIP Config

10-24 Routing Commands

202-10088-01, March 2005