NETGEAR NETGEAR user manual Ip route default, No ip address, No ip route

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Mode Interface Config

no ip address

This command deletes an IP address from an interface.

The value for <ipaddr> is the IP Address of the interface.

The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask of the interface.

Format	no ip address <ipaddr> <subnetmask> [secondary]
Mode	Interface Config

ip route

This command configures a static route. The <ip_addr> is a valid ip address. The <subnet_mask> is a valid subnet mask. The <nextHopRtr> is a valid IP address of the next hop router. The <preference> is an integer value from 1 to 255.

Default	preference - 1
Format	ip route <ip_addr> <subnet_mask> <nextHopRtr> [<pref-
	erence>]
Mode	Global Config
no ip route

This command deletes all next hops to a destination static route. If the optional <nextHopRtr> parameter is designated, the next hop is deleted and if the optional preference value is designated, the preference value of the static route is reset to its default,

Format	no ip route <ip_addr> <subnet_mask> [{<nextHopRtr>
	<preference>}]
Mode	Global Config

ip route default

This command configures the default route. The value for <nextHopRtr> is a valid IP address of the next hop router. The <preference> is an integer value from 1 to 255

Default	preference - 1
10-8	Routing Commands

202-10088-01, March 2005