NETGEAR NETGEAR Random-detect exponential-weighting-constant, Random-detect queue-parms

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

random-detect exponential-weighting-constant

This command sets the decay exponent used by the WRED average queue depth calculation for the interface.

Format	random-detect	exponential-weighting-constant <1-15>
Modes	Global Config
	Interface Config

no random-detectexponential-weighting-constantThis command restores the default value.

Format	no random-detect exponential-weighting-constant
Modes	Global Config
	Interface Config

random-detect queue-parms

This command sets the WRED parameters for each drop precedence level supported by a queue. The actual number of queue drop precedence levels is platform-specific. Use the 'no' form of this command to restore the default values for the queue WRED parameters.

Format	random-detect queue-parms <queue-id-1> [<queue-id-2>
	… <queue-id-n>] min-thresh <0-16> <0-16> <0-16> max-
	thresh <min-16> <min-16> <min-16> drop-prob-scale <1-
	15> <1-15> <1-15>
Modes	Global Config
	Interface Config

no random-detect queue-parms

Format	no	random-detect queue-parms <queue-id-1> [<queue-id-
	2>	… <queue-id-n>]
Modes	Global Config
	Interface Config

tail-drop queue-parms

This command sets the tail drop threshold parameter for each drop precedence level supported by a queue. The total number of queue drop precedence levels is platform-specific. Use the 'no' form of this command to restore the default values for the queue tail drop threshold parameters.

11-44 Quality of Service (QoS) Commands

202-10088-01, March 2005