NETGEAR NETGEAR user manual Netbios-name-server, Netbios-node-type, No ip dhcp conflict logging

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

no ip dhcp conflict logging

This command disables conflict logging on DHCP server.

Format	no ip dhcp conflict logging
Mode	Global Config

netbios-name-server

This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that are available to DHCP clients.

One IP address is required, although one can specify up to eight addresses in one command line. Servers are listed in order of preference (address1 is the most preferred server, address2 is the next most preferred server, and so on).

Default	none
Format	netbios-name-server <address>
	[<address2>...<address8>]
Mode	DHCP Pool Config
no netbios-name-server

This command removes the NetBIOS name server list.

Format	no netbios-name-server
Mode	DHCP Pool Config

netbios-node-type

The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration Protocol (DHCP) clients.type Specifies the NetBIOS node type. Valid types are:

•b-node—Broadcast

•p-node—Peer-to-peer

•m-node—Mixed

•h-node—Hybrid (recommended)

Defaultnone

Switching Commands 8-89

202-10088-01, March 2005