NETGEAR NETGEAR Spanning-tree forward-time, Spanning-tree hello-time, No spanning-tree hello-time

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

no spanning-tree forceversion

This command sets the Force Protocol Version parameter to the default value, i.e. 802.1s.

Format	no spanning-tree forceversion
Mode	Global Config

spanning-tree forward-time

This command sets the Bridge Forward Delay parameter to a new value for the common and internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the value being greater than or equal to "(Bridge Max Age / 2) + 1".

Default	15
Format	spanning-tree forward-time <4-30>
Mode	Global Config

no spanning-tree forward-time

This command sets the Bridge Forward Delay parameter for the common and internal spanning tree to the default value, i.e. 15.

Format	no spanning-tree forward-time
Mode	Global Config

spanning-tree hello-time

This command sets the Admin Hello Time parameter to a new value for the common and internal spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value being less than or equal to "(Bridge Max Age / 2) - 1".

Default	2
Format	spanning-tree hello-time <1-10>
Mode	Interface Config

no spanning-tree hello-time

Switching Commands 8-121

202-10088-01, March 2005