NETGEAR NETGEAR user manual Cos-queue strict, Random-detect, No cos-queue strict, No random-detect

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Modes	Global Config
	Interface Config

cos-queue strict

This command activates the strict priority scheduler mode for each specified queue.

Format	cos-queue strict <queue-id-1> [<queue-id-2> … <queue-
	id-n>]
Modes	Global Config
	Interface Config

no cos-queue strict

This command restores the default weighted scheduler mode for each specified queue.

Format	no cos-queue strict <queue-id-1> [<queue-id-2> …
	<queue-id-n>]
Modes	Global Config
	Interface Config

random-detect

This command is used to enable WRED for the interface as a whole, and is only available when per-queue WRED activation control is not supported by the device. Specific WRED parameters are configured using the 'random-detect queue-parms' and the 'random-detect exponential- weighting-constant' commands.

Format	random-detect
Modes	Global Config
	Interface Config

no random-detect

This command disables WRED, thereby restoring the default tail drop operation for all queues on the interface.

Format	no random-detect
Modes	Global Config
	Interface Config

Quality of Service (QoS) Commands 11-43

202-10088-01, March 2005