User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

set gmrp interfacemode

This command enables GARP Multicast Registration Protocol on a selected interface. If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a port- channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled.

Default

disabled

Format

set gmrp interfacemode

Mode

Interface Config

no set gmrp interfacemode

This command disables GARP Multicast Registration Protocol on a selected interface. If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a port- channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled.

Format

no set gmrp interfacemode

Mode

Interface Config

set gmrp interfacemode all

This command enables GARP Multicast Registration Protocol on all interfaces. If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled.

Default

disabled

Format

set gmrp interfacemode all

Mode

Global Config

no set gmrp interfacemode all

This command disables GARP Multicast Registration Protocol on a selected interface.

Format

no set gmrp interfacemode all

 

 

Switching Commands

8-103

202-10088-01, March 2005

Page 171
Image 171
NETGEAR NETGEAR user manual Set gmrp interfacemode all, No set gmrp interfacemode all