NETGEAR NETGEAR user manual Ip http secure-port, Ip http secure-protocol, Ip http secure-server

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

ip http secure-port

This command is used to set the sslt port where port can be 1-65535 and the default is port 443.

Default	443
Format	ip http secure-port <portid>
Mode	Privileged EXEC
no ip http secure-port

This command is used to reset the sslt port to the default value.

Format	no ip http	secure-port
Mode	Privileged	EXEC

ip http secure-protocol

This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or to both TLS1 and SSL3.

Default	SSL3 and TLS1
Format	ip http secure-protocol [SSL3] [TLS1]
Mode	Privileged EXEC

ip http secure-server

This command is used to enable the secure socket layer for secure HTTP.

Default	disabled
Format	ip http secure-server
Mode	Privileged EXEC
no ip http secure-server

This command is used to disable the secure socket layer for secure HTTP.

Format	ip http secure-server
Mode	Privileged EXEC

9-24 Security Commands

202-10088-01, March 2005