NETGEAR NETGEAR user manual Police-single-rate

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Restrictions	Only one style of police command (simple, singlerate, tworate) is
	allowed for a given class instance in a particular policy.
Policy Type	In
Incompatibilities	Mark IP DSCP, Mark IP Precedence
police-single-rate

This command is used to establish the traffic policing style for the specified class. The single-rate form of the police command uses a single data rate and two burst sizes, resulting in three outcomes: conform, exceed and violate. The conforming data rate is specified in kilobits-per- second (Kbps) and is an integer from 1 to 4294967295. The conforming burst size is specified in kilobytes (KB) as an integer from 1 to 128. The exceeding burst size is specified in kilobytes (KB) as an integer from 1 to 128. Note that the exceeding burst size must be equal to or greater than the conforming burst size.

For each outcome, the only possible actions are drop, set-cos-transmit,set-sec-cos-transmit,set- dscp-transmit, set-prec-transmit, or transmit. In this singlerate form of the police command, the conform action defaults to send, the exceed action defaults to drop, and the violate action defaults to drop. These actions can be set with this command once the style has been configured.

For set-dscp-transmit, a <dscpval> value is required and is specified as either an integer from 0 to 63, or symbolically through one of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32,

af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.

For set-prec-transmit, an IP Precedence value is required and is specified as an integer from 0-7.

Format	police-single-rate {<1-4294967295> <1-128> <1-128>
	conform-action {drop set-cos-transmit <0-7> set-
	sec-cos-transmit <0-7> set-prec-transmit <0-7>
	set-dscp-transmit <0-63> transmit} exceed-action
	{drop set-cos-transmit <0-7> set-sec-cos-transmit
	<0-7> set-prec-transmit <0-7> set-dscp-transmit
	<0-63> transmit} [violate-action {drop set-cos-
	transmit <0-7> set-sec-cos-transmit <0-7> set-
	prec-transmit <0-7> set-dscp-transmit <0-63>
	transmit}]}
Mode	Policy-classmap Config
Restrictions	Only one style of police command (simple, singlerate, tworate) is
	allowed for a given class instance in a particular policy.
Policy Type	In
Incompatibilities	Mark IP DSCP, Mark IP Precedence
Quality of Service (QoS) Commands		11-25

202-10088-01, March 2005