NETGEAR NETGEAR user manual Exceed Action, Bandwidth, Shaping Average

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Conform DSCP Value This field shows the DSCP mark value if the conform action is markdscp.

Conform IP Precedence Value This field shows the IP Precedence mark value if the con- form action is markprec.

Exceed Action	The current setting for the action taken on a packet considered to
	exceed to the policing parameters. This is not displayed if polic-
	ing not in use for the class under this policy.

Exceed DSCP Value This field shows the DSCP mark value if this action is markdscp.

Exceed IP Precedence Value This field shows the IP Precedence mark value if this action is markprec.

Non-Conform Action The current setting for the action taken on a packet considered to not conform to the policing parameters. This is not displayed if policing not in use for the class under this policy.

Non-Conform DSCP Value This field displays the DSCP mark value if this action is markdscp.

Non-Conform IP Precedence Value This field displays the IP Precedence mark value if this action is markprec.

Bandwidth	This field displays the minimum amount of bandwidth reserved
	in either percent or kilobits-per-second.

Expedite Burst Size (KBytes) This field displays the maximum guaranteed amount of bandwidth reserved in either percent or kilobits-per-second for- mat.

Shaping Average	This field is displayed if average shaping is in use. Indicates
	whether average or peak rate shaping is in use, along with the
	parameters used to form the traffic shaping criteria, such as CIR
	and PIR. This is not displayed if shaping is not configured for the
	class under this policy.

Shape Committed Rate (Kbps) This field is displayed if average or peak rate shaping is in use. It displays the shaping committed rate in kilobits-per-sec- ond.

Shape Peak Rate (Kbps) This field is displayed if peak rate shaping is in use. It displays the shaping peak rate in kilobits-per-second.

Random Drop Minimum Threshold This field displays the RED minimum thresh- old.This is not displayed if the queue depth management scheme is not RED.

Quality of Service (QoS) Commands 11-35

202-10088-01, March 2005